1PCS DMX512/1990 Signal Input 1/2 Channel DMX Digital Triac dimmer AC Phase Cut Output, Used to Control Traic dimmable LED Driving Lights(S1-DR)

DimmersPlease note that this product does not include batteriesDMX triac dimmer1. DMX triac dimmer complies with the latest DMX512, DMX512(1990), DMX512-A, RDM V1.0 (E1.20 - 2006 ESTA standard) standard protocols.2. DMX Triac dimmer converts standard DMX512/1990 signals into 1/2-channel AC phase-cut output for controlling Traic dimmable LED drivers or lamps.3. The DMX address can be set through the digital tube display keys or remotely through the DMX512/RDM console.4. Leading edge dimming or trailing edge dimming, the minimum brightness is set by the digital tube display key.5. Overheating protection.S1-D:AC phase-cut MOSFET dimmer with DMX512 function, two-channel output.Comply with DMX512 standard protocol.Digital digital display, set the DMX decoding start address through buttons.The RDM function can realize the intercommunication between the DMX host and the decoder.For example, the DMX decoder address can be set via the DMX console.1/2 DMX channel output optional.You can choose reverse phase dimming or positive phase dimming.Minimum brightness setting is 1% to 40%.Independent dynamic mode and 2-channel dimming mode are optional.Controlled by buttons with built-in programs, not DMX signals.For dimming and switching monochromatic dimmable LED lamps, traditional incandescent lamps and halogen lamps.Overheating protection, automatic recovery.S1-DR:AC phase-cut MOSFET dimmer with DMX512 function, two-channel output.Comply with DMX512 standard protocol.Digital digital display, set the DMX decoding start address through buttons.RDM function enables intercommunication between DMX hostsand decoder.1/2 DMX channel output optional.You can choose reverse phase dimming or positive phase dimming.Minimum brightness setting is 1% to 40%.Independent dynamic mode and 2-channel dimming mode are optional.Controlled by buttons w

• Dimmers