30A Solar Charge Controller 30 amp Solar Panel Regulator with Load Timer, 12V 24V Auto with LCD Display USB 5V 1500mA and Usd for Control Landscape Lights and Water Features

This is a compatible PWM charge controller PWM intelligent/efficient/energy saving, he not only has efficient PWM controller charging function to automatically track the maximum power point, 10%-30%higher than the ordinary controller charging efficientcystandby energy savingAlso has more than 30% energy than ordinary controller, the standby power consumption of only 10mA-15mA. This is a three-Period(time) controllerinto the evening (evening) working timean interval of rest or pause timeDawn working time (morning light function)the user can according to their needs ,set a different time. A: time(evening working);B: time(Pause working); C: time(dawn working) Warm Tips:1. Always connect the battery before connect the solar panel, disconnect in reverse order.2. Make sure your battery has enough voltage for the controller to recognize the battery type3. If an inverter is to be connected to the system, connect the inverter directly to the battery, not to the load side of the controller.4. A fuse which current is 1.25 to 2 times the rated current of the controller, must be installed on the battery side with a distance from the battery not greater than 150 mm.Description: LCD screen display Easy operation interfacePWM charging modeParameter user can resetA key to open and close the loadA key to restore the factory settingsBattery reverse discharge protectionBattery reverse polarity protectionBattery under voltage protectionOverload, short-circuit protectionAutomatic temperature compensation function,Can charge and discharge at the same time, Always keep the battery in full statusUSB 5V charge (current 1500mA) Optional Package contents: 1* T30A PWM Solar Controller 1* English User Manual 1* Temp Sensorand

• [ 30A Solar Charge controller ]: the solar charger controller compatibility with 12V 24V system. Discharge Current: 20A,build-in industrial micro controller, automatically manage the working of solar panel and battery in solar system. USB output 5V/2.5A (max), to support mobile phone chargeing
• [ Multiple Protection Functions ]: solar controller has short-circuit protection, open-circuit protection,reverse protection, over-load protection. Fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery
• [ Battery Type ]: The charge regulator is suitable for lead-acid batteries, gel batteries and lithium phosphate batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 10V, the solar controller will turn off automatically
• [ LCD Display ]: Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc
• [ Easy to Install and Operate ]: The charge controller should connect the battery first, then the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order.Dual mosfet Reverse current protection, low heat production. ( Note: The charge controller will heat up when it is running. Please be careful to install the charger controller on a flat, well-ventilated place)