7.5-10 HP Replacement Air Compressor Pump 2-Stage 4-Cylinder 36 CFM @ 175 PSI Compressor Source CS2105T

The Compressor Source CS2105T is a two-stage, four-cylinder compressor pump rated for 10 HP and designed to deliver 35.3 CFM at 860 RPM, with a recommended operating range of 730–900 RPM (36 CFM max). The pump is commonly paired with 80-gallon or larger tanks and electric motors rated 7.5 HP or higher. Pairing with a 7.5 HP motor operating at 220 volts, drawing 32 amps or more, outputs lower RPMs closer to the minimum of 730 RPMs. Higher CFM output is achieved by pairing the CS2105T with a 10 HP or larger motor and running the pump at its higher end of the RPM range. The pump is supplied with intake filters and a flywheel, as shown. Features: Cast iron cylinder and crankcase Sight glass for monitoring oil level Two intake filters included Specifications: Four cylinder Two-stage 7.5-10 HP Recommended working pressure: 175 PSI Recommended RPM: 730–900 CFM: 36 max CFM at 730 RPM: 28 Bolt pattern: 9-1/4" (front to back) × 9-5/8" (side to side) Shipping Note: This item ships via freight due to its weight. Residential freight deliveries may be routed to a nearby terminal for pickup.

• 4-cylinder cast-iron two-stage air compressor pump
• 10-horsepower pump that delivers up to 36 CFM @ 175 PSI at a minimum 730 RPM
• Most commonly used on 80-gallon or larger compressor tanks
• Usable with 220-volt 7.5 and 10-horsepower or larger electric motors
• Universal replacement, commonly used in place of CI-10, CA2, Saylor-Beall Model 707, Ingersoll Rand 2545, and Campbell Hausfeld TX2101 pumps