AC Single Phash Digital Panel Voltmeter Current Meter TTL 220V 100A LED Voltage Watt Kwh Meter With Split CT USB Cable

Working voltage: 80 ~ 260VACTest voltage: 80 ~ 260VACRated power: 100A/22000WOperating frequency: 45-65HzMeasurement accuracy: 1.0 gradeOperating Temperature: -10-60degreeDimensions: 118mm*60mm*27mmModel Number: PZEM-004Power Supply: ACMeasuring Range: 0-100ACommunication Port: TTLAccessory: Split+USB cablePower: 0-22kwCertificate: CE,FCCI. Display InterfaceDisplay interface is formed by four bright red digital tubes, used to display the voltage, current, power, energy parameters.II. Display Format1. Power: Test Range: 0 ~ 22kWWithin 0 ~ 10kW, the display format is 0.000 ~ 9.999;Within 10 ~ 22kW, the display format is 10.00 ~ 22.00.2. Energy: Test Range: 0 ~ 9999kWhWithin 0 ~ 10kWh, the display format is 0.000 ~ 9.999;Within 10 ~ 100kWh, the display format is 10.00 ~ 99.99;Within 100 ~ 1000kWh, the display format is 100.0 ~ 999.9;1000 ~ 9999kWh and above, the display format is 1000 ~ 9999.3. Voltage: Test Range: 80 ~ 260VACDisplay Format is 110.0 ~ 220.0.4. Current: Test Range: 0 ~ 100ADisplay Format is 00.00 ~ 99.99.III. KeyThere is a key on the panel, it can be used to reset energy.The method of reset energy: Long press the key for 5 seconds until the digital on energy display window flicker, then release the key. Short press the key again, then the energy data is cleared and quit the flickering state, now the reset operation is completed; if long press for 5 seconds again until no longer flicker, it means exit the reset stateIllustration of the communication1. Connect hard wire according to the wiring diagram in figure 1 and 2.2. After connect the wire, please choose the communication port, this module’s upper computer software support communication port: COM2\COM3\COM4, you can check through device manager, if it is not the above communication port, you should amend it through port.

• Ectrical parameter measurement function (voltage, current, active power, energy).
• Overload alarm function (over power alarm threshold the power flash).
• Power alarm threshold preset function ( can set power alarm threshold).
• The reset function of energy key.
• Store data when power off (store the accumulated energy before power off).