DC 6-30V Support Micro USB 5V LED Display Automation Cycle Delay Timer Control Off Switch Time Relay 6V 9V 12V 24V(Black Relay)

relayThe function of the two modules is the same, only the relay is of different stylesProduct Features:Wide voltage power supply (6 ~ 30V) supports micro USB 5.0V power supply, easy to use;The interface is clear and simple, powerful, easy to understand, meet almost all your needs;There is a key stop function (STOP key), with reverse polarity protection, reverse polarity does not burn;Increase the sleep mode, it enables, without any operation within 5 minutes, turn off the monitor automatically; any key to wake up;You can set a different OP, CL, LOP parameters, which are independent of each other, were saved;All setup parameters are saved automatically power down.Product parameters:Operating voltage: 6--30V support micro USB 5.0V power supplyThe trigger source: high trigger (3.0V-24V) signal with no common ground system to improve anti-jamming capability of the system (also self-shorting common ground)Output capability: You can control the DC or AC within 30v 5A within 220v5AQuiescent Current: 20mA Operating Current: 50mATiming range: 0.1 seconds -999 minutes continuously adjustable;Availability: more than 10 million timesWorking temperature: -40-85 ;size: 6.2 * 3.8 * 1.7cmwith optocoupler isolation, enhanced anti-jamming capability, industrial grade circuit boards, set the parameters after power failure memory forever.Special Note: The relay outputs are passive contact, uncharged output to control a line-off role.Product Manual:Operating mode:P1: After the trigger signal, the relay is turned OP time, and then disconnect; in the OP time, as followsP1.1: Invalid signal triggered againP1.2: Re-timing signal is triggered againP1.3: Reset signal is triggered again, the relay off, stop the clock;P-2: to the trigger signal, the relay after time off CL, OP relay conduction time, after the counting is finished, disconnect relay;P3.1: After the trigger

• relay