Digital Ultrasonic Flaw Detector, Portable NDT Instrument with 5.7 inch Screen, Output Function, Measure Range 1-10000mm

Introduction Digital ultrasonic flaw detector is advanced type,, can quickly, easily and without damage, accurately detect, locate, evaluate and diagnose various defects inside the work-piece such as cracks, welds, pores, sand holes, inclusions, folding, etc. It has been applied for electric power, petrochemical, boiler and pressure vessel, steel structure, military, aerospace, railway transportation, automobile, machinery and other fields. It is an essential instrument for the non-destructive testing industry. Technical Specification Scan range (mm) Scan range (mm): 0~10000 Grades: 2.5,5,10,20, 30,40,50,60,70,80,90, 100,150,200, 250, 300, 350, 400, 450,500,600,700,800,900,1000,2000,3000,4000,5000,6000,7000,8000,9000, 10000. Adjusting step distance: 1mm Pulse shift ( μs ) Pulse shift ( μs ): -7to +9984 Grades: -20, -10, 0.0, 10, 20, 50, 100, 150, 200, 250, 300, 350, 400, 450, 500, 600,700,800,900,1000,1500,2000,2500,3000,3400. Adjustment step:1（-7μs~9984μs） Probe zero point(μs): Probe zero point：0.0~99.99; Adjust the step：0.01 Material sound speed(m/s): Material sound speed:1000~15000; 7 fixed sound speeds:2260,2730,3080,3230,4700,5900,6300 Adjust the step:1 Working methods: Single probe (receive and send), dual probes (one for receiving one for sending) Frequency Range(MHz): 0.5~20 Gain adjustment(dB): 0~120; Adjust the step: 0.2,1,2,4,6,8,10,20,50 Linear inhibition: Screen height 0% to 80%, step size: 1% Vertical linearity error: Vertical linear error, not more than 3% Horizontal linear error: Within the scan range, not more than 0.2% Flaw detection sensitivity margin: ≥62dB Dynamic Range: ≥32dB Alarm: Incoming wave alarm Display screen: High-brightness color 5.7 in display A-Scan display area: Full screen or local; A-Scan shows freeze and thaw A-Scan fills Flaw detection channel: 300 Data storage: 500 A-Scan graphics PC communication interface standard: USB Units of measurement: Mm Power Adapter: enter 100V~240V/50Hz~60Hz; Output 9V/1.5A Battery: Lithium (Li) Battery 5000mAh Working temperature (°C): -10~50°C Working humidity (RH): 20%~90% Interface Type: BNC Dimensions (mm): 220*140*50 Weight(kg): 1.0 Package Included: 1 x Main unit 1 x Straight probe 1 x Angle probe 1 x probe connecting cable 1 x Power adaptor 1 x Warranty card

• Measurement display mode: Positive wave,negative wave,full wave and wave
• Linear suppression function: the maximum inhibition is 80% of the screen height
• It can switch between single crystal probe, double crystal probe and two inspection modes
• It has a gate setting and alarm function. The position and width of the gate can be arbitrarily set on the screen, and an incoming wave alarm can be set
• with Two display modes with angle and K value; Automatic probe calibration function
• 500 independent detection channels, each channel set a separate set of testing parameters, DAC curve
• Automatically generates DAC curves with up to 10 recordable points and four adjustable offset curves, as well as AVG curves customizable for two defect types
• Stores 100 A-scan patterns, parameters, and DAC curves, with a graphics playback feature, the stored A-scan graphics from the storage area and displayed on the screen
• Equipped with a 5000mAh Li-battery, can continuous operation for over ten hours, and supports USB communication interface for data transfer
• Additional Practical Features: Includes a buzzer alarm setting, peak memory function, freeze/thaw capabilities for waveform and inspection parameters, sound path measurement, echo frequency analysis, real-time power status indication, and is lightweight and easy to operate