Drip Depot 3/4" Mainline Head Assembly - 1 Zone - 25 PSI - Manual Control - Plastic, Rectangular - Y Pattern - Integrated Canister Filter

*SPECIAL NOTE: This is a head assembly kit only. It does not include everything you need to make a complete working drip irrigation system. These kits are designed to work in conjunction with our other drip irrigation kits when you need to connect your system to more than one water faucet. This 3/4" Mainline Head Assembly kits come with the top of the line canister filter and your choice of 15 or 25 PSI regulators. The 15 PSI Head Assembly Kit is designed for use with a Drip Tape system. This kit is also designed with 3/4" (.820" ID x .940" OD) poly tubing as the mainline to allow for higher flow rates. Use the Faucet Y Splitter to manually operate two separate zones. 3/4" Mainline - 15 PSI - 2 Zone Head AssemblyCongratulations on your purchase of a 3/4" Mainline - 15 PSI - 2 Zone Head Assembly Kit from Drip Depot!Please take a few minutes to read through these instructions and familiarize yourself with all the parts. For assistance with part names and details, you can print the list of parts included in your kit from the Kit item page on our website.Drip Depot Irrigation kits are modular in design, as no two gardens are completely alike. Should you have any questions while installing your kit please feel free to email our Customer Support team or review some of our many resources in our Education Center, found under the "Learn" tab in the menu bar on our website.Installing your Head AssemblyPlease Note: The 2 Zone Head Assembly Kit can be installed on two separate faucets/spigots or the Faucet Y Splitter can be installed on a single spigot and each head assembly installed on one of the outlets for manually controlling two zones.1. Install the Hose Thread Vacuum Breaker or Backflow Preventer, included in your kit, to the outdoor spigot or the outlet of the Faucet Y Splitter. Ensure this item has the rubber washer seated completely down inside the female threaded connection prior to installation. Hand tighten only, no teflon tape or pipe dope is required with hose

• Compatible with 3/4" (.820" ID x .940" OD) Poly Tubing
• Standard 3/4" Garden Hose Thread Connections
• Easy Set-Up Instructions Online
• Drip Depot Irrigation Certified