Emergency Eye Wash Station& Shower Set, 304 Stainless Steel Eyewash Station Shower with Abs Basin for Factory/Lab/Machinery/Building Industries

Important Parameters: Sealing pressure: 0.4MPA Shower diameter: 32MM Material: thick 304 stainless steel+ABS coating Spray flow: 120-180 liters/min Light source type: 12L/min Working pressure: 0.2-0.4MPA Applicable conditions: normal temperature water or water that meets sanitary standards Installation method: 1. The installation location should be within 15 meters of the accident-prone place, and it can reach the impact within 10 seconds at a running speed. Wash place. 2. Wrap the sealing tape at the connection of each part, connect the water pipe and 3. After connecting the inlet and outlet pipes, check whether the ball valve switch is flexibly in place and whether there is jamming. Instructions: 1. Before use, open the water inlet control valve 2. When washing your eyes, please push the push plate of the eyewash switch in a clockwise direction, the eyewash valve opens, and press the counterclockwise Pull back the push plate in the direction of the needle, and the eyewash valve closes.

• Stainless Steel Material + ABS Coating: High-quality S304 stainless steel+outdoor special ABS powder electrostatic spraying, corrosion resistance, and the eye-catching yellow color, convenient for positioning the eyewash station.
• Dual Eyewash Nozzle-Built-in bubbler with filter foam and dustproof function. The dust cover on the top can be dustproof. It can be washed away by water at any time and reduce the short high water pressure when suddenly opening, avoiding eye damage.
• Hands Free Eye Wash-Push the push valve switch in clockwise direction to open (opening Angle is 90°), and the nozzle will immediately release water, the eye washer station's stay open ball valve allows hands-free operation. Counterclockwise pull back the push valve to close and stop the water out of the nozzle. Dust cover should be reset after use.
• Parameters: The nozzle flow rate is 12L per minute, the water pressure requirement is 0.25-0.45mpa