Flow Control Meter TUF-2000M-TM-1 Ultrasonic Flow Meter, TM1 Sensor (DN50-700mm) Liquid Flowmeter with Modbus RS485 Used for Metal Or Plastic Pipe

TUF-2000M-TM-1 Ultrasonic Flow Meter TM1 Sensor (DN50-700mm) Liquid Flowmeter With Modbus RS485 Used For Metal Or Plastic PipeIntroduction:The ultrasonic flow meter is designed to measure the fluid velocity of liquid within a closed conduit. The transducers are a non-contacting, clamp-on type, which will provide benefits of non-fouling operation and easy installation.The flow meter operates by alternately transmitting and receiving a frequency modulated burst of sound energy between the two transducers and measuring the transit time that it takes for sound to travel between the two transducers. Features:6. More than 4 different kinds of communication protocol supported by the same time, include MODBUS, Meter-BUS.7. Date totalizers that can record as much as 64 sets of data by day, 32 sets of data by month. All the data can be retrieved by use of the MODBUS registers.8. 32 records of power-on and power-off data. Data can be read through MODBUS.9. Built-in data logger/printer, full programmable with what to be print, the start time, interval, and output times.10. Power supply by 8VDC~36VDC/50mA or 10VAC~30VAC/50mA. Terminals:The following parameters need to be configured for a proper measurement: (1) Pipe outer diameter(2) Pipe wall thickness(3) Pipe materials (for non-standard pipe materials*, the sound speed for the material must be configured too)*Standard pipe materials and standard liquids refer to those with the sound parameters that have already been programmed into software of the flow meter, therefore there is no need to configure them(4) Liner material and its sound speed and thickness, if there is any liner.(5) Liquid type (for non-standard liquids, the sound speed of the liquid is also needed)(6) Transducer type adapted to the flow meter.(7) Transducer mounting methods (the V-method or Z-method is the common option)(8) Check up the Space displayed on M25 and inst

• 1. better than 1% accuracy, better than 0.2% repeatability.
• 2. RS485 serial port.
• 3. Three analog inputs.
• 4. One 4-20mA analog output.
• 5. Two OCT output channels.