High Pressure Electric Air Pump Air Compressor with Water Cooling 110V 30MPA for Equipment High Pressure Inflation

<p>Parameters:<br>Voltage: 110V <br>Power: 1.80KW <br>Working pressure: 300BAR/ 30MPA/ 4500PSI <br>Work flow: 50L/min <br>Material: Aluminum <br>Product size: 360*180*370 mm / 14.17*7.09*14.56inch <br>Package size: 19.69*11.81*19.29inch <br>Inflating speed: 2800r/min <br>Noise: MAX 78DB <br>Weight:44lb <br>Filling Time: 10mins per 1L tank Valve Quantity <br>Cooling System: water cooling</p> <p>Description:<br>1. The product should be placed at a place that it couldn’t be touched by children.<br>2. Please do not use it in moist and flammable place.<br>3. Please do not modify it arbitrarily, disassembling and repair by non-technical personnel is not allowed.<br>4. Make sure the socket could withstand a current greater than 8A before using it, or the circuit might be burnt, the product might be damaged and the dangers may be caused due to overload of the socket.<br>5. Please do not touch the head section after the machine was just being used, so as to not be burnt by high temperature.<br>6. Please do not leave without authorized, or the product might be damaged by increasingly rising pressure, sustained overload motor,even halt due to the operation pressure has reached but it is not turned off timely.<br>7. When it is used for inflating slightly larger container, the cooling water should be changed every 30 minutes, in this way, the cylinder temperature could be better controlled.<br>8. The machine oil should be checked regularly, make sure the oil level is above the upper edge of the red point. If color of machine oil becomes dark and black, it should be changed in time.</p> <p>Item include(022268) :<br>one set High Pressure Electric Air Pump</p>

• The high pressure air compressor pump is made of aluminum cylinder and parts, which can be used for a long time with high quality. Suitable for firefighting, diving, mining, petrochemical industry.
• The machine adopts water cooling, sufficient cooling water should be prepared in advance before starting, when used to inflate slightly larger containers, the cooling water should be replaced every 30 minutes, so as to better control the temperature of the cylinder.
• The electric high compressor pump oil should be checked regularly, make sure the oil level is above the upper edge of the red point. If color of machine oil becomes dark and black, it should be changed in time.
• The separator can fine filter, brass sintered filter element, can filter more than 5 micron impurity particles.
• The safety valve on the cyclone controls the gas pressure in the low-pressure part of the machine to prevent the failure of the high-pressure part of the machine leading to gas backflow.