JVCC DC-4199CS Double-Sided Film Tape: 1 in x 60 yds. (Clear)

<p><b>JVCC DC-4199CS Double-Sided Film Tape</b> is a polyester film tape coated on both sides (AKA double-coated) with an extremely quick stick, high peel, and high shear strength, solvent-free water-based pure acrylic adhesive. This double-sided tape has superior moisture resistance in high humidity. JVCC DC-4199CS is used for high-speed flying splice of paper, corrugated paper, plastics, films, foils, etc. Also for mounting nameplates and keyboard assembly; and laminating dissimilar metals. Comes on a white siliconized paper release liner.</p> NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 24mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Silica, crystalline (airborne particles of respirable size), which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov/.<br><br><b>Technical Information</b><br>- Core: 3 inch diameter neutral <br>- Backing/Carrier: polyester (PET) film <br>- Adhesive: solvent-free water-based pure acrylic <br>- Release Liner: white siliconized paper <br>- Thickness: 6.4 mils (carrier, adhesive, liner) 3.5 mils (carrier, adhesive) 0.5 mils (carrier) <br>- Adhesion: 44 ounces per inch (to stainless steel test panel) <br>- Tensile Strength: 7.5 pounds per inch (longitudinal) <br>- Service/Operating Temperature: -40F to 248F <br>- Elongation: 100 % <br>

• JVCC DC-4199CS Double-Sided Film Tape is a polyester film tape coated on both sides (AKA double-coated) with an extremely quick stick, high peel, and high shear strength, solvent-free water-based pure acrylic adhesive.
• This double-sided tape is used for high-speed flying splice of paper, corrugated paper, plastics, films, foils, etc. Also for mounting nameplates and keyboard assembly; and laminating dissimilar metals.
• Carrier/Backing: polyester (PET) film. Adhesive: solvent-free water-based pure acrylic. Release Liner: white siliconized paper
• Thickness: 6.4 mils (carrier, adhesive, liner) 3.5 mils (carrier, adhesive) 0.5 mils (carrier) 2.9 mils (liner). Adhesion: 44 ounces per inch (to stainless steel test panel). Tensile Strength: 7.5 pounds per inch (longitudinal).
• Service/Operating Temperature: -40F to 248F. Elongation: 100%. Core: 3-inch diameter neutral.