Magnetic G10 Garolite 3D Printer Build Plate for PLA, PETG, ABS, and Nylon for Bambu Lab X1C, P1S, X1, P1P, A1, X1E

Brand: Lightyear 3d

Features:

• Easy Bed Adhesion - PLA, PETG, ABS, and Nylon stick to the G-10 composite bed without the use of glue-stick, hairspray, or painters tape
• Magnetic Base - We use a cold-rolled sheet of stainless steel to magnetize the G-10 build plate, making swapping surfaces easy
• Easy Print Removal - Parts pop off the build plate once the surface returns to room temperature
• QR Code - We included the QR code for the High Temp PEI plate, so you don't have to manually start prints
• 1.5mm Thick G-10 - Thick enough to stay perfectly flat, while being thin enough to flex large prints off the build plate.
• Simple to Maintain - Just wipe with isopropyl alcohol after each print. Build plate comes pre-textured, so there is no need to sand the surface down yourself.
• Easy to Install - Remove your printer's original build plate, and replace it with the Magnetic Composite Build Plate.

Details: Easy Bed Adhesion - PLA, PETG, ABS, and Nylon stick to the G-10 composite bed without the use of glue-stick, hairspray, or painters tape Easy Print Removal - Parts pop off the build plate once the surface returns to room temperature Magnetic Base - We use a cold-rolled sheet of stainless steel to magnetize the G-10 build plate, making swapping surfaces easy QR Code - We included the QR code for the High Temp PEI plate, so you don't have to manually start prints 1.5mm Thick G-10 - Thick enough to stay perfectly flat, while being thin enough to flex large prints off the build plate. Simple to Maintain - Just wipe with isopropyl alcohol after each print. Build plate comes pre-textured, so there is no need to sand the surface down yourself. Easy to Install - Remove your printer's original build plate, and replace it with the Magnetic Composite Build Plate.

EAN: 0642461666144

Binding: Tools & Home Improvement

Part Number: LY-235C