Paul Components IS Brake Adapter - High Polished

Paul Components IS Brake Adapter 

IS or Post Mount, we’ve got you covered for rotor sizes 140 through 203mm. Mount screws with thread lock already applied come with all adapters. Machined to perfect tolerances here in Chico, California. Instructions about determining size below.

Specifications

• Material
  Aluminum and Heat Treated Steel
• Weight
  +0mm IS: 15g
  +20mm IS: 16g
  +40mm IS: 26g
  +20mm Post Mount: 21g
  +40mm Post Mount: 21g
• Finish
  Anodized
• Color
  Black or Silver
• Mount
  IS or Post Mount
• Torque Spec
  Typically 6-8nm but double check brake and frame/fork manufacturer.

Product Story

IS mounts are the type with the mounting screws that install horizontally. We make them in +0, +20 and +40. To figure out what size adapter you need, you’ll have to check and see what size rotor your frame and/or fork were designed for. For example: if your fork was designed to fit a 160mm rotor and you want to run a 180mm rotor, that is a difference of 20mm, and that’s the adapter you would need. Another example would be a frame that was designed to fit a 140mm rotor, where you want to run a 160mm rotor: you would also need a 20mm adapter.

src="https://cdn.shopify.com/s/files/1/0032/9023/4992/files/Prop65Small.png?v=1757586189" alt="">WARNING: This product contains chemicals known to the State of California to cause cancer reproductive harm

The products in this store may expose you to chemicals such as Nickel which are known in the state of California to cause cancer, and Bisphenol A (BPA) which is known to the state of California to cause birth defects or other reproductive harm.

For more information go to https://www.p65warnings.ca.gov