Pro-Tek Chain Adjuster Bolt Repair Kit Made For KTM 620 EXC 1994 1995 1997 and KTM 620 RXCe 1996 1997 1998 and KTM 620 SX 1997 1998 and KTM 625 SXC 2003 2004 (5 Bolts)

You are looking at a Pro-tek SWING ARM BUDDY repair kit that replaces a chain adjuster bolt after it seizes or breaks off in the swing arm of most off road motorcycles.During normal cleaning and/or operating in moist environments, water enters and migrates to the rear of the swing arm causing the bolt to rust and seize. Consequently, at the next chain adjustment interval, the bolt can break off in the swing arm. This is becoming an increasingly common problem with today's motocross, street and enduro bikes.Rather than removing the swing arm from the bike, the SWING ARM BUDDY allows the average rider to fix the broken stud in approximately 10 minutes without the expense of a machine shop, normally required for this repair.It comes with a high-speed hardened drill bit used to drill out the broken bolt. You then permanently insert the stainless steel threaded block. With threads replaced, a new adjustment bolt and lock can now be used. And because we use stainless steel, binding and seizing do not occur , so next time the bolt wears down, simply screw another one in. Its that simple.NOTE: Because we are drilling out the broken bolt, the new bolt will have a larger head than the stock chain adjuster bolt. You will now use a 1/2" or 13mm socket instead of the stock 13/32" or 10mm socketIt comes in five distinct kits containing one 3/8" extractor drill bit and 1-5 special thread fittings. Instructions are also supplied.These kits are brand new, still in original packaging with manufacturer warranty. These are American made kits from a name you can trust- Pro-tek- a leader in the motorcycle industry for over 30 years.Applications:1994-1995 KTM 620 EXC1997 KTM 620 EXC1996-1998 KTM 620 RXCe1997-1998 KTM 620 SX2003-2004 KTM 625 SXC

• Replaces seized and/or broken chain adjuster bolts
• Kit allows you to replace broken bolts in approximately 10 minutes without having to remove the swingarm from the bike
• Comes with a high-speed hardened drill bit that is used to drill out broken bolt, then a stainless steel threaded insert block can be easily and permanently inserted
• With threads replaced a new adjustment bolt and lock can be used
• Kits available with one, two, three, four, and five bolts