Speedway Compatible with Ford 9 Inch Rear End Housing Kit with Axles, 56 Inch

Looking for a budget-friendly, rock-solid foundation for your custom rear suspension? Look no further. Our fabricated steelCompatible with Ford 9 inch axle housing kit including two axles for maximum durability. Fabricated with the Builder in Mind This housing is pumpkin-centered with uniform-length axle tubes, side-to-side. So mounting suspension brackets, especially on triangulated 3-link and 4-link systems, is much easier. Note that the pumpkin-centered design will offset the pinion yoke about 1" to the passenger side. Axle tubes are 3” O.D. with a 3/16” wall thickness. Heavy-wall tubes, along with a larger center section, significantly reduce distortion during welding of rear-link brackets or spring pads. Billet steel “New BigCompatible with Ford” (Torino) style bearing ends are fixture-welded (3.150” O.D. bearing, with 2.50” axle flange offset). Total wheel-to-wheel mounting surface width is 56" (from hub-to-hub). The pumpkin is centered in the housing, which puts the pinion 1" offset from center, requiring different length axle shafts. This 56" rear end housing kit includes two 31 Spline 29.5" cut-to-fit axles The housing includes (8) T-bolts for the axle bearing retainer plates and (10) studs for the third member. Steel Axles Our axle housings deserve strong axles to drive your street machine. Two axles made of alloy steel have the strength to handle the horsepower. Axles are 31-spline, includes axle bearings, axle seals, and bearing retainers. Flanges are drilled for both 5 on 4-1/2"Compatible with Ford/Compatible with Mopar, 5 on 4-3/4" GM, 5 on 5" GM Truck wheel bolt patterns. New fabricated steel center section. 3" O.D. axle tubes with 3/16" wall thickness. Billet steel "New BigCompatible with Ford" (Torino) style bearing ends. Forged Steel axle, drilled for 5 on 4-1/2"Compatible with Ford/Compatible with Mopar, 5 on 4-3/4" GM car, and 5 on 5" GM Truck Bolt patterns using 0.685" knurl diameter

• Our fabricated steel Compatible with Ford 9 inch axle housing kit includes two axles designed for maximum durability
• The housing is pumpkin-centered with uniform-length axle tubes side-to-side, so mounting suspension brackets is much easier
• Heavy-wall tubes, along with a larger center section, significantly reduce distortion during welding of rear-link brackets or spring pads
• These improved axle housings deserve equally strong axles to drive your street machine. Two axles made of alloy steel have the strength to handle the horsepower
• Axles are 31-spline, includes axle bearings, axle seals, and bearing retainers