SW-Stahl 11626L Counter Support for Internal Extractor 60-130 mm I Internal Puller Tool I M24 Spindle I M10 and G3/8 Thread

For internal extractors. Mounting thread: M10 and G3/8 inch

• This counter support is required if you want to use an internal extractor. All inner pullers that have a diameter between 5 and 40 mm fit the counter-support.
• The puller has an M10 and G3/8? Mounting thread and an M24 spindle.
• To connect the counter support to the inner extractor, the spindle of the counterholder is screwed into the clamping nut of the inner extractor.
• This bearing puller tool is used to loosen tensioned connections of components. Pressed, shrunk or retracted components that are held in their position by their own frictional force can be loosened with the puller.
• Before using the ball joint puller, remove all parts that could hinder the unhindered exit of the part to be removed, such as screws, nuts, wedges etc. The puller arms should be placed so that the bearing puller sits exactly in the pull axis.