Tapered Spindles USA Buffing Wheel Set of 2 R & L with 1/2” Id Hole Polishing Motor

SPECIFICATIONS: - Material: Cold Rolled Steel - Overall Length: 4-5/16" - 109mm - Arbor Body Diameter: 3/4" - 19mm - Spindle Body Length: 2-9/16" - 65mm - Spindle Shaft Depth: 1-5/16" - 33.3mm - Arbor Hole: 1/2" - 12.7mm for Shaft Connection - Weight: 3.5oz. - 100gr Spindles are made to be used on a 1/2" shaft diameter.. JETS Product # 1603-192414 + 292414

• TAPERED SPINDLES FOR 1/2" ARBOR SHAFT USE ON 1/2" SHAFT MOTOR - WITH 1/2" DIAMETER HOLE SET OF RIGHT & LEFT HAND THREADED - 4-5/16" LONG
• FEATURES: · Precision Quality · Machining is done by CNC Equipment · Made of Steel and Anodized Finish · Allen Set Screws do not protrude above the main shaft of the spindle.
• Tapered Threaded Spindles are made in the U.S.A. manufactured with close tolerances, runs true without any vibration with optimal performance of wheels and accessories being used.
• These Arbor - Spindles are used to hold Wheels with 1/8" or Pin Hole Centers: Polishing Buffs and Felt Wheels, Satin Finish wheels, Wood Hub Brushes...
• Spindles have 1/2" ID arbor holes to work on 1/2" shaft Motors or Polishers. The arbor is made with threading to be used on the RIGHT & LEFT Side of the motor (Marked R & L). Spindles have a pair of Allen Head Set Screws to attach to the motor shaft. Note: Always slightly tighten the front most set screw and then the one closest to the motor. Final tightness should be done after both are equally tight.