Tungsten Carbide Tile Drill Bit Set (1/4–1/2'' / 6–12mm) for Porcelain Ceramic Granite Glass Marble Wood, 1/4'' Hex Shank, 4-Cutter Eccentric Step Design, Dry & Wet Use— Metric+Imperial
€6.80
Preis bei Onlinekauf
Kostenloser Versand
30 Tage kostenlose Rückgabe
Verkauft und versendet von noticiasdelaquinta.com.ar
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€6.80
Preis bei Onlinekauf
Kostenloser Versand
30 Tage kostenlose Rückgabe
Verkauft und versendet von noticiasdelaquinta.com.ar
30 Tage kostenlose Rückgabe Details
Produktdetails
| Artikelnummer | 219064039 | Erscheinungsdatum | 2026/05/03 | Listenpreis | €6.80 | Modellnummer | 219064039 | ||
|---|---|---|---|---|---|---|---|---|---|
| Kategorie | |||||||||
- HRC93 Tungsten Carbide Alloy — 400+ Holes, Built to Outlast: Made from solid Tungsten Carbide Alloy rated at HRC93 hardness — among the hardest materials used in drill bit construction. Engineered to drill 400+ holes through full-porcelain tile without significant dulling, and significantly outperforms standard HSS or basic carbide-tipped bits on granite, marble, vitrified tile, and glass.meaning fewer bit replacements mid-project and lower cost per hole for DIY home repairs
- 4-Cutter Eccentric Tip — No Walking, 60% Sharper, Cleaner Starts: The eccentric tip grips the surface on contact, eliminating bit wander without tape or center-punching. Four cutting edges — sharpened to a 60% higher cutting angle than conventional tile bits — bite into hard surfaces faster, with less vibration and reduced surface chipping at the start of every hole
- 5-Step Profile, Drills 2× Faster — One Bit, Five Sizes: Stepped cutting profile covers five sizes:1/4",1/4",5/16",3/8",1/2" (6/6/8/10/12mm) with both metric and imperial markings — eliminating the need to swap bits mid-job. Apply light downward pressure and let the carbide steps do the work: this design cuts up to 2× faster than conventional tile drill bits, with the stepped edges guiding the hole open progressively for rounder, cleaner results
- Dry or Wet — Know Your Material, Get the Best Result: Dry drilling (no water needed): Regular ceramic tile, antique tile, foam brick, red brick, aerated concrete block, wood, plastic — apply steady light pressure, no coolant required. Wet drilling (add water): Vitrified tile, full-porcelain tile, marble, glass, granite, natural stone, slate — drizzle water at the drill point to reduce heat and protect both the bit and surface. Standard drill only — do NOT use hammer/impact mode
- Home DIY Ready — Bathroom, Kitchen, Walls & More: Designed for homeowners and DIY enthusiasts: drill anchor holes, mount bathroom fixtures, install kitchen backsplash hardware, hang wall brackets, and tackle tile, concrete, wood, or plastic surfaces — all with one compact bit set. Five graduated sizes (6–12mm) cover the most common home installation needs without switching tools.Get clean, precise holes the first time — no cracked tiles, no wasted trips to the hardware store
| Model | TD30108 |
|---|---|
| Set Name | 4-Cutter Eccentric Step Drill Bits |
| Brand Name | Lytool |
| Unit Count | 5.0 Count |
| Part Number | MD24816 |
| Finish Types | Black Oxide |
| Manufacturer | Lytool |
| Material Type | Tungsten Steel Alloy |
| Item Dimensions | 4.72 x 4.72 x 4.72 inches |
| Tool Flute Type | Spiral |
| Cutting Diameter | 0.5 Inches |
| Number of Flutes | 2 |
| Number of Pieces | 5 |
| Included Components | Step Drill Bits, Storage Case |
| Cutting Angle String | 90 Degrees |
| Surface Recommendation | Porcelain Tile Ceramic Granite Marble Glass Wood |
Korrektur der Produktinformationen
Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.
Korrekturanfrage