WAC Lighting EN-2460-P-AR-T 120V Input 24V Output 60W Plug-in Electronic Transformer for InvisLED Tape Light, Black

Plug-in electronic transformer for invisled tape light 120V Input 24V output 60 watt. Low voltage plug-in class 2 electronic transformer designed to be used as a plug-and-play style transformer. Contains an on/off toggle switch at the base and a 72 inch detachable cord. Models that end in -t include a lead cable for invisiled tape light systems, and models that end in -s include a lead wire for line and straight edge under cabinet lighting systems. Inherently protected and power limited, protecting the lighting system from both normal and abnormal short circuits. Built-in auto reset, soft start, short and overload circuit protection features. The soft start delayed start feature extends lamp life by delaying the abrupt inrush current to the lamp.. soft start, short and overload circuit protection features. The soft start delayed start feature extends lamp life by delaying the abrupt inrush current to the lamp. 1W minimum load to support low load LED systems. Intrinsically safe, class 2 transformers permit no greater than a 5 amp current to be drawn. Contains an on/off toggle switch at the base. Models that end in -t include a lead cable for invisiled tape light systems, and models that end in -s include a lead wire for line and straight edge under cabinet lighting systems. Input voltage: 120V AC, output voltage: 24V AC, load: 60Watt or 100 watt options. Smooth and continuous dimming with an electronic low voltage dimmer. Dimmers should always be installed on the primary side of the transformer. Standards: class 2, UL & cul listed for damp locations.

• 120V INPUT
• Max bulb wattage is 60-watt
• Supplies power with hard wiring
• Ultra thin profile of an eighth-Inch and diodes spaced evenly at 1-Inch on center
• 60-watt 24VAC class 2 LED transformer with 50000 hour rated life
• Flexible silicone cased tape light
• Peel and stick 3M construction adjesive on back with indicating marks on back for field cutting