Wind Speed Monitoring Sensor with 0.8m Cable, 3 Blade High Accuracy Anemometer Sensor, Wind Speed Detector for Weather Stations, Industry and, DC 5V RS485 Modbus Protoc

Item Type: Wind Speed Monitoring SensorMaterial: ABSProduct Size: Approx. 158x180x70mm / 6.2x7.1x2.8inSupply Voltage: DC5VCommunicating Type: RS485 (Default for Modbus Protocol)Measuring Range: Wind Speed 0‑45m/sExtension Line Length At Connection: 0.8 Meters/2.6ftAccuracy: ± (0.5+0.02V) M/s (V Represents The Real Time Wind Speed Value)Resolution: 0.1m/sStart Up Wind Speed: 0.8m/sMaximum Power Consumption: 0.48WLoad Capacity: DC12V Power Supply, Current Type Output Impedance 350ΩDC24V Power Supply, Current Type Output Impedance 900Ω, Voltage Type Output Impedance 1KΩOperating Environment: Temperature ‑35℃ to 60℃, Humidity 100.0% RH Without CondensationProtecting Grade: IP64Widely Used In: Greenhouse, Environmental Protecting, Ships, Docks, Breeding, Advertising Gates, Meteorology, Marine, Environment, Airports, Ports, Laboratories, Industry and and Transportation and Other Environments of Wind Speed Measurement.Note about the sensor communicating protocol:First, if you are using a single sensor connected to the computer to read data directly, it is recommended to use the company's private protocol (see page 3), you can visualize the data in ASCII code (hex send, non hex receive);Second, if you are a multi sensor interconnection with PLC, configuration or programmable collector, it is recommended to use the standard for ModBus RTU protocol.Third, if there is no special requirements, the sensor parameters in the device address default 1, baud rate = 9600, the protocol for ModBus RTU.Standard for ModBus RTU protocol:Serial Port Format:Data bit 8 bits, stop bit 1 bit, parity bit None, default baud rate 9600bps, serial debugging software set to hex send and receive, two communicating intervals of at least 500ms or more, CRC in the specification for the parity bit, 2 bytes. The device address is 1 by default.For Modbus CRC checksum steps

• HIGH ACCURACY MEASUREMENT: Our wind speed monitoring sensor features a 3-blade design with a resolution of 0.1m/s and accuracy of (0.50.02V) m/s, ensuring precise wind speed detection for professional applications in meteorology, marine, and industrial environments.
• DURABLE & : Built with premium ABS material and IP64 rating, this anemometer sensor withstands harsh conditions from -35 to 60, making it ideal for outdoor use in ports, airports, and agricultural settings.
• VERSATILE INSTALLATION: The 0.8m extension cable with sealing gasket allows flexible mounting options (bottom or side outlet), while the 360 measurement capability provides comprehensive wind data collection for any orientation.
• ADVANCED COMMUNICATION PROTOCOL: Supporting both Modbus RTU protocol (default) and private protocols, this wind speed detector offers seamless integration with PLC systems, computers, and data collectors for efficient wind monitoring.
• LOW POWER CONSUMPTION: With startup wind speed 0.8m/s and maximum power consumption of 0.48W, this energy-efficient sensor delivers stable performance for long-term continuous operation in various environmental monitoring applications.